2024 Vermeer® Brush Chippers BC2100XL Tier 4 Final

Information

2024 Vermeer® Brush Chippers BC2100XL Tier 4 Final

The Vermeer BC2100XL brush chipper is powered by a 275-hp (205-kW) Tier 4 Final diesel engine to tackle the toughest land-clearing projects.

With a 21-in (53.3-cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large-diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.

Features may include:

SmartFeed system
  • Improve productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.
3-year/3000-hour extended limited warranty
  • Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drums, shaft and ring-feeder hubs.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC2100XL Tier 4 Final
  • QSB
  • Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) | Tongue Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on | Toolbox Description: Lockable
  • Ultra-low sulfur diesel
  • Available
  • 243.2 cm | Infeed Table: 182.9 cm | drum: 1.3 cm
  • 295.9 cm | Infeed Hopper: 97.8 cm | Chute: 294.6 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC2100XL Tier 4 Final
  • Brush
  • QSB
  • Cummins
  • 4.9 CID
  • Tier 4 Final
  • 6
  • Gross (Maximum): 205.1 kw
  • 989.7 Nm
  • 8.6 cm
  • DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
  • Spin-on
  • Medium: Liquid
  • Manufacturer: Eaton
  • Max Fuel Consumption: 53 lph
  • Ultra-low sulfur diesel
  • Drive Engagement: Clutchless PTO
  • Tandem torsion 8000 lb (3628.7 kg) capacity
  • Electric
  • 17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
  • 2 - 950 CCA
  • Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | System Voltage: 12 volts | Controller: C148 | Shutdown System: Coolant temperature, intake manifold temperature, oil pressure | Radio Remote Control: Engine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop.
  • 130 amp Delco-Remy 245I
  • Feed: 100 ft/min | drum: 1084 rpm
  • System Type: Open center
  • Pump Flow at Maximum RPM: 49.2 L/min
  • System relief: 189.6 bar | Auto Reverse: 175.8 bar
  • 3600 cfm
  • Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) | Tongue Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on | Toolbox Description: Lockable
  • 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
  • 3 " (7.6 cm) pintle
  • Safety Lock - Number of Positions: 4 | Trailer Light Type: LED
  • Fan: 26" (66 cm) suction | Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 25.4 cm | Feed Roller Dimension: 19 " (48.3 cm) | Infeed Throat Capacity: 40 in x 24 in | Distance from Feed Table to Ground: 78.2 cm | Infeed Table Material Thickness: 1 cm | Material Capacity: 53.3 cm | Thickness: 71.1 cm | Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 5 " x 14 " (12.7 cm x 35.6 cm) | Bedknife Size: 3 " x 27.5 " (7.6 cm x 69.9 cm) | Bottom Thickness: .3 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 596.9 cm | Table Down, Tongue Extended: 657.9 cm | Infeed Table: 153.7 cm
  • 243.2 cm | Infeed Table: 182.9 cm | drum: 1.3 cm
  • 295.9 cm | Infeed Hopper: 97.8 cm | Chute: 294.6 cm
  • Tank: 246.1 L
  • Oil Volume with Filter: 16.7 L
  • Coolant Capacity (Engine and Radiator): 33.3 L
  • Feed Roller Clamp Load: 1587.6 kg
  • Tank: 90.8 L
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green-hold-to-run button | Positions: 4: E-stop, Forward, Neutral, and Reverse | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Hydraulic | Filtration Method: 10 micron return, 100 mesh suction | Type: Spherical roller | Manufacturer: Dodge
  • Of Feed Roller: 440.9 kg | With Shaft: 680.4 kg | Engine Option One: 7348.2 kg | Tongue - Engine Option One: 1338.1 kg
  • Recommended: API CJ-4 | hydraulic: Recommended: Vermeer Hy-Power 68
  • A8 chipper steel
  • 4 | Number of Bolts/Knife: 6
  • Belt Idler/Tensioner: Torsion arm spring-loaded | 5V chipper poly type
  • 4