2024 Vermeer® Brush Chippers BC2100XL Tier 4 Final
- Year 2024
- Make Vermeer®
- Model Brush Chippers
- Engine QSB
2024 Vermeer® Brush Chippers BC2100XL Tier 4 Final
2024 Vermeer® Brush Chippers BC2100XL Tier 4 Final
The Vermeer BC2100XL brush chipper is powered by a 275-hp (205-kW) Tier 4 Final diesel engine to tackle the toughest land-clearing projects.With a 21-in (53.3-cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large-diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.
Features may include:
SmartFeed system- Improve productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.
- Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drums, shaft and ring-feeder hubs.
Engine
Engine Manufacturer
Cummins
Engine
QSB
Displacement
6.7 L
Emissions
Tier 4 Final
Cylinder Liners
6
Engine Power
Gross (Maximum): 205.1 kw
Engine Torque, Maximum
989.7 Nm
Bore
8.6 cm
Air Cleaner
DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
Oil Filter
Spin-on
Cooling
Medium: Liquid
Motor
Displacement
4.9 CID
Motor Type
Manufacturer: Eaton
Fuel System
Fuel System
Max Fuel Consumption: 53 lph
Fuel Type
Ultra-low sulfur diesel
Drivetrain
Clutch
Drive Engagement: Clutchless PTO
Suspension
Suspension
Tandem torsion 8000 lb (3628.7 kg) capacity
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Front Specification
17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
Battery
Battery
2 - 950 CCA
Electric
Electrical
Switches: Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system | System Voltage: 12 volts | Controller: C148 | Shutdown System: Coolant temperature, intake manifold temperature, oil pressure | Radio Remote Control: Engine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop.
Alternator
130 amp Delco-Remy 245I
Operational
Operating Speed
Feed: 100 ft/min | drum: 1084 rpm
Hydraulics
Hydraulic Type
System Type: Open center
Hydraulic Pump
Pump Flow at Maximum RPM: 49.2 L/min
Maximum Pressure
System relief: 189.6 bar | Auto Reverse: 175.8 bar
Airflow
3600 cfm
Chassis
Chassis
Tongue Description: 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) | Tongue Extension: Two position 12" extension (30.5 cm) | Fender Description: Bolt-on | Toolbox Description: Lockable
Frame Type
2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
Hitch/Type
3 " (7.6 cm) pintle
Lights and Safety
Safety Features
Safety Lock - Number of Positions: 4 | Trailer Light Type: LED
Dimensions
Dimensions
Fan: 26" (66 cm) suction | Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 25.4 cm | Feed Roller Dimension: 19 " (48.3 cm) | Infeed Throat Capacity: 40 in x 24 in | Distance from Feed Table to Ground: 78.2 cm | Infeed Table Material Thickness: 1 cm | Material Capacity: 53.3 cm | Thickness: 71.1 cm | Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 5 " x 14 " (12.7 cm x 35.6 cm) | Bedknife Size: 3 " x 27.5 " (7.6 cm x 69.9 cm) | Bottom Thickness: .3 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg
Length
Feed Table Up, Tongue In: 596.9 cm | Table Down, Tongue Extended: 657.9 cm | Infeed Table: 153.7 cm
Width
243.2 cm | Infeed Table: 182.9 cm | drum: 1.3 cm
Height
295.9 cm | Infeed Hopper: 97.8 cm | Chute: 294.6 cm
Capacities
Fuel Capacity
Tank: 246.1 L
Oil capacity
Oil Volume with Filter: 16.7 L
Cooling System
Coolant Capacity (Engine and Radiator): 33.3 L
Load Capacity, Land
Feed Roller Clamp Load: 1587.6 kg
Hydraulic Capacity
Tank: 90.8 L
Features
Dynamic: 29710.3 kg | Capacity - Option One: 235/75R17.5 load range J
Weights
Weight
Of Feed Roller: 440.9 kg | With Shaft: 680.4 kg | Engine Option One: 7348.2 kg | Tongue - Engine Option One: 1338.1 kg
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green-hold-to-run button | Positions: 4: E-stop, Forward, Neutral, and Reverse | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Hydraulic | Filtration Method: 10 micron return, 100 mesh suction | Type: Spherical roller | Manufacturer: Dodge
Oil Type
Recommended: API CJ-4 | hydraulic: Recommended: Vermeer Hy-Power 68
Construction Material
A8 chipper steel
Knife Quantity
4 | Number of Bolts/Knife: 6
Belt Type
Belt Idler/Tensioner: Torsion arm spring-loaded | 5V chipper poly type
Paddle Quantity
4