2024 Vermeer® Brush Chippers AX19

Information

2024 Vermeer® Brush Chippers AX19

When it comes to power and productivity, the AX19 Vermeer brush chipper is designed with robust features to expand your job possibilities.

Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (5443.1kg) of pull-in force with the support of the patented SmartCrush control system, allowing you to feed large-diameter logs or branchy limbs with minimal effort. With no two jobs alike, the AX19 is built to finish the challenge.

Features may include:

Fixed infeed table
  • The fixed infeed table design and oversized infeed opening gives the operator improved performance and durability when mechanically feeding.
Dual offset horizontal feed rollers
  • Dual offset horizontal feed rollers lessens the need for the operator to manually control the machine when feeding large-diameter logs.
Winch option
  • When equipped with the winch option, the winch can be operated with or without the boom in place, which is easily removed with just six bolts. When removed it allows the operator to mechanically feed the chipper, without the winch structure interfering with the loading process.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers AX19
  • Model: 4045HFC09
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • Diesel
  • Available
  • 200.7 cm | Infeed Table: 180.3 cm | drum/disc: 1.3 cm | Infeed Throat Capacity: 28.875"
  • 274.3 cm | Infeed Hopper: 88.9 cm | Chute: 274.3 cm | Infeed Throat Capacity: 24" tall

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • AX19
  • Brush
  • Model: 4045HFC09
  • John Deere
  • 4
  • Gross Horsepower (Maximum): 129 kw
  • 667.1 Nm
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • 6.4 cm
  • 28.4
  • Manufacturer: White RE470
  • Max Fuel Consumption: 25.7 lph
  • Diesel
  • 12" Spring Loaded | Drive Engagement: Manual Lever
  • Tandem Torsion 7000 lb capacity | Type - Option One: TandemTorsion | Manufacturer - Option One: Dexter
  • Electric
  • LT285/75R16 Load Range E
  • 950 CCA
  • 90
  • System Voltage: 12
  • Actuation Force (BFSB): 15.4 kg | Actuation Force: 34 lbs | Rope Line Pull: 1474.2 kg
  • Feed: 119 ft/min | drum/disc: 1100 | Winch: 87 rpm
  • System: Open Center
  • Pump Flow at Maximum RPM: 56 L/min
  • System relief: 206.8 bar | Auto Reverse: 193.1 bar | Winch: 158.6 bar
  • Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
  • 7.5" Z-Channel x 0.25" Thick
  • Pintle
  • Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 12.7 cm | Feed roller diamension: 19" / 11" | Distance from Feed Table to Ground: 77 cm | Infeed Table Material Thickness: .6 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 3.8 cm | Material Thickness: 27.9 cm | Material Capacity: 48.3 cm | drum/disc Thickness: 66.3 cm | drum/disc- Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 0.625 x 5 x 10 | Bedknife Thickness: 3.2 cm | Bottom Thickness: .2 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg | Bedknife Size: 3" x 20.25" | Wheels: 16" | Winch Rope: 9/16"
  • Infeed Table: 153.7 cm | Feed Table Up, Tongue In: 569 cm | Table Down, Tongue Extended: 599.4 cm | Feed roller dimension: 28.25" / 28.25" | Rope: 45.7 m
  • 200.7 cm | Infeed Table: 180.3 cm | drum/disc: 1.3 cm | Infeed Throat Capacity: 28.875"
  • 274.3 cm | Infeed Hopper: 88.9 cm | Chute: 274.3 cm | Infeed Throat Capacity: 24" tall
  • 26" Suction
  • 151.4 L
  • Oil Volume with Filter: 14.7 L
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers motors: 2 | Feed Roller Clamp Type: Hydraulic | Number of Feed Roller Motors: 4 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical Roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Rotation Type: Worm gear with rotational lock | Filtration Method: 6 micron return, 100 micron suction | Fender Description: Bolt-on | Rotational Lock: Self lock | Winch Controls: Forward, Reverse, Free Spool
  • Feed Roller Clamp Load: 1814.4 kg
  • Tank: 75.7 L
  • Without winch and hydraulic jack: 4989.5 kg | with winch, hydraulic jack and hydraulic chute: 5171 kg | of Feed Roller: 158.8 kg / Option Two: 84.4 kg | With Shaft: 1160 lbs (526.2 kg)
  • Recommended Oil: ACEA E-7 & E-6 or API CI-4 | HY POWER 68
  • 12 / 10 / 4 | Number of Bolts/Knife: 5
  • Drum/disc: A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom Structure: 0.25 GR50 detachable
  • 12
  • 5V