2024 Vermeer® Brush Chippers AX19
- Year 2024
- Make Vermeer®
- Model Brush Chippers
- Engine Model: 4045HFC09
2024 Vermeer® Brush Chippers AX19
2024 Vermeer® Brush Chippers AX19
When it comes to power and productivity, the AX19 Vermeer brush chipper is designed with robust features to expand your job possibilities.Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (5443.1kg) of pull-in force with the support of the patented SmartCrush control system, allowing you to feed large-diameter logs or branchy limbs with minimal effort. With no two jobs alike, the AX19 is built to finish the challenge.
Features may include:
Fixed infeed table- The fixed infeed table design and oversized infeed opening gives the operator improved performance and durability when mechanically feeding.
- Dual offset horizontal feed rollers lessens the need for the operator to manually control the machine when feeding large-diameter logs.
- When equipped with the winch option, the winch can be operated with or without the boom in place, which is easily removed with just six bolts. When removed it allows the operator to mechanically feed the chipper, without the winch structure interfering with the loading process.
Engine
Engine
Model: 4045HFC09
Engine Manufacturer
John Deere
Cylinder Liners
4
Engine Power
Gross Horsepower (Maximum): 129 kw
Engine Torque, Maximum
667.1 Nm
Air Cleaner
2 Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
6.4 cm
Motor
Displacement
28.4
Motor Type
Manufacturer: White RE470
Fuel System
Fuel System
Max Fuel Consumption: 25.7 lph
Fuel Type
Diesel
Drivetrain
Clutch
12" Spring Loaded | Drive Engagement: Manual Lever
Suspension
Suspension
Tandem Torsion 7000 lb capacity | Type - Option One: TandemTorsion | Manufacturer - Option One: Dexter
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Front Specification
LT285/75R16 Load Range E
Battery
Battery
950 CCA
Electric
Alternator
90
Electrical
System Voltage: 12
Operational
Operating Conditions
Actuation Force (BFSB): 15.4 kg | Actuation Force: 34 lbs | Rope Line Pull: 1474.2 kg
Operating Speed
Feed: 119 ft/min | drum/disc: 1100 | Winch: 87 rpm
Hydraulics
Hydraulic Type
System: Open Center
Hydraulic Pump
Pump Flow at Maximum RPM: 56 L/min
Maximum Pressure
System relief: 206.8 bar | Auto Reverse: 193.1 bar | Winch: 158.6 bar
Chassis
Frame Type
7.5" Z-Channel x 0.25" Thick
Chassis
Tongue Description: 5" x 3" x 0.375" | Extension: Extendable 12"
Hitch/Type
Pintle
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 12.7 cm | Feed roller diamension: 19" / 11" | Distance from Feed Table to Ground: 77 cm | Infeed Table Material Thickness: .6 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 3.8 cm | Material Thickness: 27.9 cm | Material Capacity: 48.3 cm | drum/disc Thickness: 66.3 cm | drum/disc- Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 0.625 x 5 x 10 | Bedknife Thickness: 3.2 cm | Bottom Thickness: .2 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg | Bedknife Size: 3" x 20.25" | Wheels: 16" | Winch Rope: 9/16"
Length
Infeed Table: 153.7 cm | Feed Table Up, Tongue In: 569 cm | Table Down, Tongue Extended: 599.4 cm | Feed roller dimension: 28.25" / 28.25" | Rope: 45.7 m
Width
200.7 cm | Infeed Table: 180.3 cm | drum/disc: 1.3 cm | Infeed Throat Capacity: 28.875"
Height
274.3 cm | Infeed Hopper: 88.9 cm | Chute: 274.3 cm | Infeed Throat Capacity: 24" tall
Fan Diameter
26" Suction
Capacities
Fuel Capacity
151.4 L
Oil capacity
Oil Volume with Filter: 14.7 L
Features
Coolant Capacity (Engine and Radiator): 121.1 L | Dynamic Capacity: 14242.8 kg | Static: 24267.2 kg | Capacity - Option One: 14,000 (Tandem 7,000 lbs)
Load Capacity, Land
Feed Roller Clamp Load: 1814.4 kg
Hydraulic Capacity
Tank: 75.7 L
Weights
Weight
Without winch and hydraulic jack: 4989.5 kg | with winch, hydraulic jack and hydraulic chute: 5171 kg | of Feed Roller: 158.8 kg / Option Two: 84.4 kg | With Shaft: 1160 lbs (526.2 kg)
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers motors: 2 | Feed Roller Clamp Type: Hydraulic | Number of Feed Roller Motors: 4 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical Roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Rotation Type: Worm gear with rotational lock | Filtration Method: 6 micron return, 100 micron suction | Fender Description: Bolt-on | Rotational Lock: Self lock | Winch Controls: Forward, Reverse, Free Spool
Oil Type
Recommended Oil: ACEA E-7 & E-6 or API CI-4 | HY POWER 68
Knife Quantity
12 / 10 / 4 | Number of Bolts/Knife: 5
Construction Material
Drum/disc: A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom Structure: 0.25 GR50 detachable
Paddle Quantity
12
Belt Type
5V