Tubeline TLR5000 AX2

The TLR5000 has been refined resulting in a lighter, more maneuverable machine. But don’t let that fool you, this wrapper is built tough to handle heavy silage bales. The easy towing wagon chassis also allows for quick placement. A rear cam axle lowers the chassis bringing the tail to the ground. This ensures the proper angle as the bales are pushed off the wrapper. To ensure good compression, the cam axle allows you to address the amount of drag on the tail to provide the right amount of resistance.

Pre-Tensioners Feature Image


To create the 55% (approx.) stretch of the plastic, the pre-tensioners are knurled which allows them to grip and pull the plastic between the rollers activating the bonding agent in the film.


Film Snap Feature Image

Film Snap – Patent Pending

Standard on all inline Balewrapper models, Tubeline’s Film Snap easily cuts wrap with a single action. Press and hold the Film Snap plunger located beside the operator’s panel until both the tensioners pass, triggering the cutting action. The Film Snap bar snaps into action safely cutting the wrap without stopping the cycle.


3 Year Warranty Feature Image

3 Year Warranty

Inline wrappers carry a 3 Year Limited Warranty. For more information please contact Tubeline Manufacturing.

ECV Exclusive Features

  • Soft Start
  • Bale Counter (Lifetime)
  • Bale Counter (Resettable)
  • Bale Presets
  • Large Easy to Read Display
  • Remote Engine Start
  • Self-Diagnostics
  • Single Joystick Control to drive/steer

Other Standard Features

  • Main Control Panel Wired for Field Installed Options
  • Safety Shut Off Switch on Guards
  • Safety Shut Off Switch on Panel
  • Retractable Tongue
  • Folding Tongue
  • 13HP Honda Engine
  • Low Oil Alert on Engine
  • Spark Arrestor on Engine
  • Hydraulic Manifold
  • Hydraulic Steering
  • Temperature Gauge on Hydraulic Tank
  • 25L / 6.6 USG Fuel Tank with Fuel Pump
  • Limit Switches
  • Adjustable Stroke Length on Charge Table
  • Electric over Hydraulic Controls
  • Fully Automatic Cycling
  • Automatically Idles Down When Cycle Completed
  • Drive Wheel
  • Wrap Carrier
  • Lock Pin (Hoop)
  • Roller Wheels
  • Push Ram
  • Push Ram Cylinders
  • Cross Tube Unloading (to push off last bale) Patented
  • King Pins with Tapered Bearings
  • Road Lights
  • 3-Year Warranty
  • Guide Rollers on Discharge Ramp
  • Quick Start Power Jack
Overall Lengh 18'
Width 9'
Height 9'
Weight 5,000 lbs
Power 13 Hp Honda
Electric Start Standard
Alternator 18 Amp.
Hydraulics Self-contained
Controls Electric over Hydraulic
Tires (2) 11L x 15 8 Ply, (2) 27 x 10.5 Traction
Quick Start Leveling Quick Deck Adjust
Brakes (Compactor) Deck Tight Pack
Steering Electric over Hydraulic
Emergency Stop E Stop Button
Hydraulic Tail Gate N/A - Fixed
Transport Lights Standard
Bale Round Up to 5' 6"
Bale Square (Single) NA
Bale Square (Double Stacked) NA
Film Strecher (2) 30" x 55%
Bale Alignment Fixed Guides
Bale Guide Roller Standard
Hoop Speed Adj. Flow Control Valve
Cycle Times - 5' Round (66" Cycle lenght) 29 sec.
Cycle Times - 4' Round (54" Cycle lenght) 23 sec.
20 Horsepower Honda Engine Feature Image

20HP Honda Engine

Honda Engines power the fluid through the hydraulic system ensuring efficient flow from the reservoir to valve body. The 20HP engine comes with a high flow pump providing an ample supply of fluid to the valve body.

Remote Steering and Shutdown Kit Feature Image

Remote Steering and Shutdown Kit

This rugged remote allows you to start, shut down, and control your wrapper remotely.

Remote Engine Start Feature Image

Remote Engine Start

This switch, located on the control panel, toggles between the engine starting with the key directly, or by using the remote.

Night Working Light Kit (Halogen) Feature Image

Night Working Light Kit (Halogen)

The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.

Dual Hydraulic Power Drive Feature Image

Dual Hydraulic Power Drive

The dual hydraulic power drive gives your wrapper’s drive system more power to get through tough to drive through areas.

Night Working Light Kit (LED) Feature Image

Night Working Light Kit (LED)

The night working light kit extends your working hours to ensure you get all your wrapping done no matter when you start.

Film Sensor Feature Image

Film Sensor

The film sensor automatically shuts down the wrapper hoop when it detects a break in the film, or when the wrapper runs out of wrap.

Bale Dispatch Arm Feature Image

Bale Dispatch Arm – Patented

Optional on select models, the integrated Bale Dispatch makes final bale push off even easier. Mounted to the side of the wrapper the spring assisted Bale Dispatch lowers across the tail to form a solid push bar. Once deployed, one cycle of the ram is enough to push the bale from the tail of the wrapper.

Twin Wrap Kit Feature Image

Twin Wrap Kit

Tubeline’s Twin Wrap Kit holds two rolls of film and passes them through a single stretcher. This activates the wraps’ bonding compound to form a strong 2-Ply layer of film that stands up to tough hay stalks and folds them over helping to prevent piercing of the wrap.

By combining two sets of two rolls for a total of four, Tubeline’s twin wrap kit provides all the same protection as four separate stretchers with the additional benefit of producing a more durable bonded 2-Ply film that stands up better than four single ply layers.

Laser Guidance System

Laser Guidance System

Optional on all AX2 inline wrappers, the laser guidance system is designed to automatically steer the wrapper, spacing your bale rows consistently every time.

Contact Information

5310 Pyrogy Drive, Glendon, Alberta, CA  T0A 1P0

Message to Vendor

Your Name:

Your telephone number:


Your Message

Body Type Bale Wrapper
Hour 0
Year 2018
Exterior Color Yellow
Vin 18R112
Financing calculator
Vehicle price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Monthly Payment
Total Interest Payment
Total Amount to Pay