fbpx

Mustang 3200VT Track Loader

10 Video

Mustang 3200VT Track Loader

  • Lift Height   130.0″ (3302 mm)
  • Capacity       3,200 lbs (1452 kg)
  • Power           114 hp (85 kW) @ 2300

Performance

The Mustang 3200VT Track Loader was designed from the ground up with powerful breakout forces on the jobsite.

3200VT_pick block_web

Height to Hinge Pin – Fully Raised (mm) 130″ (3302)
Operating Capacity at 35% Tipping Load with Optional Counterweight (kg) 3,200 lbs. (1452)
Ground Speed – Standard 2-Speed (km/hr) 7.8 mph (12.6)
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.

Operator’s Cab

The extra-large, state-of-the art operator’s station on the new 3200VT Track Loader is designed for optimal operator comfort resulting in all-day productivity on the jobsite.

3200VT Cabin

      • Pilot controls that have the controls mounted to the seat were they move with the operator.
      • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
      • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator’s seat, opens the door or switches off the ignition.

 

    • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
    • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
    • Multi-purpose LCD display provides easy readout during operation.
    • Single button allows simple scrolling and selection of various display functions.
    • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position
    • Optional HydraGlide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Controls

Controls on the 3200VT Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

3200VT Controls

  • Optional IdealAccess Fold-Up Door, that provides a cab-to-canopy versatility, all while maintaining low clearance.
  • Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Engine

The Mustang 3200VT Track Loader engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

3200VT Engine

Make/Model Deutz/TD 3.6 Tier IV
Type 4-Stroke Turbo
Displacement/Cylinders (L) 221 cu.in. (3.6)/4
Gross Power (kW) @ rpm 114 hp (85) @ 2300
Net Power (kW) @ rpm 108 hp (80.8) @ 2300
Peak Torque (Nm) 339 ft.-lbs. (430)
Oil Pump Capacity (L) 9 qts. (8.5)
Alternator Voltage/Amperage 14V/95A
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.

Hydraulics

The Mustang 2500RT NXT3 Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

3200VT_Dozer_Landscape_web

Auxiliary Hydraulic Flow – Rated Speed (L/min) 27 gpm (102.2)
High-Flow Hydraulic Flow – Rated Speed (L/min) 37.4 gpm (141.6)
  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Powerful drive motors deliver superior pushing power to the tracks.
  • Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
  • Power track drive motors deliver superior pushing power.
  • Optional Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.

Lift Arm

The robust lift-arm on the 3200VT Track Loader is designed for optimal strength, visibility and capacity.

3200VT_Block_web

Height to Hinge Pin – Fully Raised (mm) 130″ (3302)
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple “in-line” design increases structural integrity by eliminating the complex geometry and welding found on many competitive “offset” lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.

Serviceability

Serviceability is very important to our customers. The 3200VT is sure to exceed your service expectations.

2500RT NXT3 Service

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.
Dimensions
A. Overall Operating Height - Fully Raised (mm) 169" (4293)
B. Height to Hinge Pin - Fully Raised (mm) 129.2" (3251)
C. Reach - Fully Raised (mm) 42.2" (1072)
D. Dump Angle - Fully Raised 39.3°
E. Dump Height - Fully Raised (mm) 99" (2515)
F. Maximum Rollback Angle - Fully raised 89.3°
G. Overall Height at ROPS (mm) 82.9" (2106)
H. Overall Length w/Bucket - Std. c-wt. (mm) 157" (3988)
I. Overall Length w/o Bucket - Std. c-wt. (mm) 124.6" (3165)
J. Specified Height (mm) 77.1" (1959)
K. Reach at Specified Height (mm) 32.3" (821)
L. Dump Angle at Specified Height 64.7°
M. Maximum Rollback Angle at Ground 30.3°
N. Carry Position (mm) 8" (204)
O. Maximum Rollback Angle at Carry Position 31.1°
P. Digging Position - Below Ground (mm) -0.2" (-5)
Q. Angle of Departure with Std. c-wt. 27°
R. Ground Clearance (mm) 12.4" (315)
S. Track Gauge (mm) 51.6" (1311)
T. Track Shoe Width (mm) 17.7" (450)
U. Crawler Base (mm) 61.8" (1570)
V. Overall Width - Less Bucket (mm) 69.5" (1766)
W. Bucket Width (mm) 83.9" (2131)
X. Clearance Radius - Front With Bucket (mm) 97.2" (2469)
Z. Clearance Radius - Rear w/ Std. c-wt. (mm) 72.2" (1834)
Maximum Rollback at Specific Height 64.5°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% Tipping Load (kg) 3,200 lbs (1452)
Operating Capacity at 50% Tipping Load (kg) 4,571 lbs (2074)
Tipping Load (kg) 9,143 lbs (4148)
Operating Weight (kg) 11,610 lbs (5267)
Engine
Make/Model Deutz / TD 3.6 Tier IV
Type 4-Stroke Turbo
Displacement (L) / Cylinders 221 cu. in (3.6) / 4
Gross Power (kW) @ rpm 114 hp (85) @ 2300
Net Power (kW) @ rpm 108 hp (80.8) @ 2500
Peak Torque (Nm) @ rpm 297 ft-lbs. (403) @ 1600
Oil Pan Capacity (L) 9 qts. (8.5)
Alternator Voltage / Amperage 14V / 95A
Track Drivers
Drawbar Pull / Tractive Effort (kg) 12,770 lbs (5792)
Track Type / Track Rollers / Roller Type Rubber / 5 / Steel
Track Width (mm) 17.7" (450)
Ground Pressure (bar) 5.3 psi (0.37)
Forces
Bucket Breakout - Tilt Cylinder (kg) 9,901 lbs (4492)
Bucket Breakout - Lift Cylinder (kg) 7491 lbs (3398)
Ground Speed - Single Speed (km/hr) 5.3 mph (8.6)
Ground Speed - Two Speed (km/hr) 7.8 mph (12.6)
Volume
Fuel Tank (L) 32.5 gal. (123)
Hydraulic System (L) 16.5 gal. (62.5)
Hydraulic Reservoir Tank (L) 7.8 gal. (52.2)
Coolant Capacity (L) 5.1 gal. (19.3)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 27 gpm (102.2)
High-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear
Battery Duel Battery
Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F (-18°C)

Contact Information

5310 Pyrogy Drive, Glendon, Alberta, CA  T0A 1P0
PHONE:
780-635-3936

Message to Vendor

Your Name:

Your telephone number:

Email:

Your Message

$ REQUEST
Body Type Track Loader
Hour 0
Fuel type Diesel
Engine Deutz/TD 3.6 Tier 4
Year 2018
Exterior Color Orange
Financing calculator
Vehicle price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Calculate
Monthly Payment
Total Interest Payment
Total Amount to Pay
This website uses cookies and asks your personal data to enhance your browsing experience.