2024 Vermeer® Brush Chippers BC1800XL Tier 4 Final

Information

2024 Vermeer® Brush Chippers BC1800XL Tier 4 Final

Speed and large capacity equals high productivity.

When the jobsite calls for large-diameter chipping, look to the Vermeer BC1800XL brush chipper. Built with strength for demanding conditions, the BC1800XL possesses the power and features needed for land-clearing and tree care operations.

The BC1800XL is now available with a John Deere Tier 4 Final engine with 173 hp (129 kW). Other standard features include the patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.

Features may include:

Vertical feed rollers
  • Reduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
Improved operator safety
  • Provides operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.
Tree Commander remote control
  • With the standard Tree Commander remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely. The remote can be attached to the operator’s belt directly to the operator’s station of a Vermeer mini skid steer.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC1800XL Tier 4 Final
  • 4045HFC09 / QSF3.8L Tier 4 Final / 4045HFC04
  • Tongue Description: 4 x 4 x 0.375 | Extension: Two 12" Increments (for non winch)
  • Diesel
  • Available
  • 199.4 cm | Infeed Table: 170.2 cm | drum: 1.3 cm
  • 271.8 cm | Infeed Hopper: 86.4 cm | Chute: 279.4 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC1800XL Tier 4 Final
  • Brush
  • 4045HFC09 / QSF3.8L Tier 4 Final / 4045HFC04
  • John Deere / Cummins / John Deere
  • 4
  • Gross Horsepower (Maximum): 129 kw / 96.9 kw / 103.7 kw
  • 667.1 Nm / 488.1 Nm / 539.6 Nm
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • 7.5 cm
  • 28.4
  • Manufacturer: White RE470
  • Diesel
  • 12" Spring Loaded | Drive Engagement: Manual Lever
  • Torflex | Type - Option One: Rubber Torsional | Manufacturer - Option One: Dexter
  • Electric
  • 235/75R17.5 load range H
  • 17.5" x 6.75" BC of 8 on 6.5"
  • 950 cca
  • System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Controller: Vermeer ACS: CB02 | Shutdown System: High temp, low pressure, | Radio Remote Control: Tree Commander
  • 90
  • Rope Line Pull 907.2 kg
  • Feed: 117 ft/min | drum: 1100
  • System Type: Open Center
  • Pump Flow at Maximum RPM: 23.8 L/min
  • System relief: 193.1 bar | Auto Reverse: 165.5 bar | Winch Relief System: 206.8 bar
  • 3544 cfm
  • Tongue Description: 4 x 4 x 0.375 | Extension: Two 12" Increments (for non winch)
  • 7" x 2.13" Channel
  • Pintle | Fender Description: Integrated
  • Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock | Trailer Light Type: LED
  • Fan: 26" Suction | Maximum Angle of Continuous Operation: 30 deg | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 77.5 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | diameter: 5.1 cm | Material Thickness: 27.9 cm | Material Capacity: 48.3 cm | Thickness: 66.4 cm | Drum/Disc Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 3.2 cm | Bottom Thickness: .2 cm | Top Thickness: .8 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .3 cm | Chute Rotation Angle: 270 deg | Feed Roller Dimension: 23.5" x 18 | Winch Rope: 7/16" | Rope Choker: 1/4"
  • Feed Table Up, Tongue In: 449.6 cm | Table Down, Tongue Extended: 586.7 cm | Infeed Table: 91.4 cm | Rope: 45.7 m
  • 199.4 cm | Infeed Table: 170.2 cm | drum: 1.3 cm
  • 271.8 cm | Infeed Hopper: 86.4 cm | Chute: 279.4 cm
  • tank: 132.5 L
  • Oil Volume with Filter: 14.7 L
  • Coolant Capacity (Engine and Radiator): 121.1 L
  • Feed Roller Clamp Load: 172.4 kg
  • Tank: 45.4 L
  • Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Type: Spherical roller | Manufacturer: Linkbelt| Winch Controls: Forward, Reverse, Free Spool
  • Without winch and hydraulic jack: 4354.5 kg | with winch, hydraulic jack and hydraulic chute: 4701.9 kg | of Feed Roller: 52.6 kg | With Shaft: 526.2 kg
  • Recommended: ACEA E-7 & E-6 or API CI-4 | Recommended hydraulic: Vermeer VMF
  • A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom Structure: 0.25 GR50
  • 11 | 4 | Number of Bolts/Knife: 5
  • Belt Idler/Tensioner: Spring loaded | 5V
  • 12