2024 Vermeer® Brush Chippers BC1200XL Gas

Information

2024 Vermeer® Brush Chippers BC1200XL Gas

When there’s tough brush-clearing work to do, you can count on the Vermeer BC1200XL to handle it.

The electronic fuel injection engine provides improved fuel economy with 115 horsepower (85.8 kW). This allows for more efficient working conditions and boosts engine response under load.

Features may include:

Dual horizontal offset feed rollers
  • Get more done thanks to the aggressive feeding action of dual horizontal offset feed rollers.
SmartFeed system
  • Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.
Clutchless PTO system
  • Prevent premature wear to the belt drive system using the clutchless PTO system, which prevents high-speed engagement of the cutter drum.
Electronic fuel injection engine
  • With improved fuel economy, the 115-hp (85.8-kW) Origin gas engine allows for more efficient working conditions and boosts engine response under load.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC1200XL Gas
  • PSI 4.XL
  • Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
  • Gasoline
  • Available
  • 200.7 cm | Infeed Table: 132.1 cm | Drum: 50.8 cm
  • 261.6 cm | Infeed Hopper: 81.3 cm | Chute: 264.2 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC1200XL Gas
  • Brush
  • PSI 4.XL
  • 6
  • Gross (Maximum): 85.8 kw
  • 313.2 Nm
  • 2-stage dry with safety valve
  • Spin-on
  • Medium: Liquid
  • 6.2 cm
  • Manufacturer: White Hydraulic
  • Max Fuel Consumption: 31.4 lph
  • Electronic
  • Gasoline
  • Axle/Suspension: Torsion | Type - Option: Rubber torsional | Manufacture: Dexter axle
  • Electric
  • ST235/80/R16 Load Range E / ST285/75/R16 Load Range E
  • 16" (40.6 cm)
  • Group 31; 950 CCA
  • System Voltage: 12 volt | Switches: Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle | Controller: Vermeer ACS | Display: LCD | Shutdown System: High temperature, low pressure
  • 70 Amp
  • Feed: 110 ft/min | drum: 2000 rpm | Winch Input: 51 rpm
  • Actuation Force: 15.4 kg | Rope Line Pull: 907.2 kg
  • 124 dB(a)
  • System Type: Open center, dual pumps
  • Pump Flow at Maximum RPM: 17 L/min
  • System relief: 172.4 bar | Auto Reverse: 172.4 bar | Winch relief: 151.7 bar
  • 2000 cfm
  • Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
  • 7" (17.78) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • Trailer Light Type: LED
  • Fan: 19" sucker | Tongue Description: 6.4 cm x 11.4 cm x 9.5 mm | Feed Roller Minimum Distance to Drum: 2.5 cm | Feed Roller Dimension: 15 | Feed Roller Dimension (Two): 11.1" (28.3 cm) | Infeed Throat Capacity: 13.3" x 17" (33.7 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 171.2 cm | Distance from Feed Table to Ground: 69.1 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 5.1 cm | Material Thickness: .3 cm | Material Capacity: 33.8 cm | Thickness: 1 cm | Knife Thickness: 1.6 cm | Knife Size: .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 2.5 cm | Bottom Thickness: .2 cm | Top Thickness: .3 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .3 cm | Chute Rotation Angle: 270 deg | Winch Boom Structure: .25" (6.4 mm) Grade 50 | Winch Rope: 7/16' (1.11 cm)
  • Feed Table Up, Tongue In: 426.7 cm | Table Down, Tongue Extended: 523.2 cm | Infeed Table: 76.5 cm | Rope: 45.7 m
  • 200.7 cm | Infeed Table: 132.1 cm | Drum: 50.8 cm
  • 261.6 cm | Infeed Hopper: 81.3 cm | Chute: 264.2 cm
  • Oil Volume with Filter: 4.3 L
  • Coolant Capacity (Engine and Radiator): 15.1 l
  • Feed Roller Clamp Load: 1202 kg
  • Tank: 45.4 L
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic cylinder | Number of Feed Roller Motors: 2 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, and reverse | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Manual pivot with handle | Filtration Method: 10 micron return, 100 micron suction | Lock - Number of Positions: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Winch Controls: Forward, reverse and free spool
  • Of Feed Roller: 68 kg / 36.3 kg | With Shaft: 217.7 kg | Engine Option One: 2576.4 kg | Tongue - Engine Option One: 299.4 kg
  • Recommended: SAE 10W30 | hydraulic Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife Material: 1018
  • 8 / 12 | Number of Bolts/Knife: 4
  • 5
  • 5V