2024 Vermeer® Brush Chippers BC1000XL Tier 4 Final

Information

2024 Vermeer® Brush Chippers BC1000XL Tier 4 Final

The heavy-duty Vermeer BC1000XL brush chipper with its all-steel engine enclosure is designed to hold up for the long haul.

Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, expect smooth towing thanks to the rubber-torsion suspension.

Features may include:

25-gal (94.6 L) fuel tank
  • Keep up the pace because the BC1000XL comes with a 25-gal (94.6 L) fuel tank that lets you put in more hours before refueling.
Minimized maintenance
  • Minimize maintenance because once the shield is opened, belts can be changed without tools, and the clutchless PTO system eliminates the need to slide the engine.
Patented bottom feed stop bar
  • Provides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward/reverse feed positions mounts over the feed table and enables the operator to stop the feed rollers and select forward or reverse operations.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC1000XL Tier 4 Final
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Unleaded and E10 gasoline
  • Available
  • 168.9 cm | Infeed Table: 132.1 cm | Drum/Disc: 50.8 cm | Infeed Throat: 17" (43.2 cm)
  • 256.5 cm | Infeed Hopper: 30.5 cm | Chute: 256.5 cm | Infeed Throat: 12" (30.5 cm)

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC1000XL Tier 4 Final
  • Brush
  • Deutz
  • 28.3
  • 4
  • Tier 4 Final
  • Maximum: 55.2 kw / 36.5 kw
  • 245.4 Nm / 146.4 Nm
  • 6.1 cm
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White
  • Diesel | Max Fuel Consumption: 17.4 lph / 11.4 lph
  • Unleaded and E10 gasoline
  • Clutchless PTO | Drive Engagement: Belt tensioner
  • Torsion | Type - Option: Rubber torsional | Manufacturer - Option: Dexter
  • ST235/80/R16 Load Range E / ST235/80R16 Load Range E
  • 16" (40.6 cm) / 16" x 6" (40.6 cm x 15.2 cm)
  • Group 31; 950 CCA
  • System Voltage: 12 Volt
  • 95 amps
  • Feed: 105 ft/min | 2050 rpm
  • Actuation Force (BFSB): 15.4 kg | Actuation Force: 15.4 kg
  • 119 dB(A)
  • System Type: Open center
  • Pump Flow at Maximum RPM: 10.2 L/min
  • System relief: 172.4 bar
  • 580 cfm
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • Trailer Light Type LED
  • Fan: 18.625" (47.3 cm) suction / 15" (38.1 cm) suction | Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 2.5 cm | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 168.9 cm | Distance from Feed Table to Ground: 66 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 30.5 cm | Thickness: 50.8 cm | Diameter: 50.8 cm | Knife Thickness: 1.6 cm | Knife Size: 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5 " x 17.3 " (8.9 cm x 43.8 cm) | Bedknife Thickness: 2.5 cm | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 406.4 cm | Table Down, Tongue Extended: 528.3 cm | Infeed Table: 81.3 cm
  • 168.9 cm | Infeed Table: 132.1 cm | Drum/Disc: 50.8 cm | Infeed Throat: 17" (43.2 cm)
  • 256.5 cm | Infeed Hopper: 30.5 cm | Chute: 256.5 cm | Infeed Throat: 12" (30.5 cm)
  • Tank: 94.6 L
  • Volume with Filter: 7.9 L
  • Coolant Capacity (Engine and Radiator): 50.3 L / 11 L
  • Feed Roller Clamp Load: 158.8 kg| Static: 53500 lbs
  • Tank: 26.5 L
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral, and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Rotation handle with pin lock | Filtration Method: 10 micron return; 100 micron suction | Manufacturer: Linkbelt | Switches: Feed Stop Bar Sensitivity, Droop, Ecoldle | Controller: Vermeer ACS | Display: Multifunctional display (MFD)
  • Of Feed Roller: 181.4 kg | With Shaft: 208.7 kg | Engine Option One/two: 2265.7 kg / 2265.7 kg | Tongue - Engine Option One/two: 272.2 kg / 272.2 kgkg
  • Recommended: 10W30 | hydraulic Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on-steel
  • 5
  • 5V
  • 2 | Number of Bolts/Knife: 4