2024 Vermeer® Brush Chippers BC1000XL Gas

Information

2024 Vermeer® Brush Chippers BC1000XL Gas

Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper.

Complete with a 72.4-hp (54-kW) Deutz 2.9 L4 gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ engine control system and patented SmartFeed technology and has a 12-in (30.5-cm) cutting capacity.

Features may include:

Electronic fuel injection (EFI) engine
  • An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines.
SmartFeed system
  • Increase operator productivity while reducing strain on vital engine parts with the help of the patented SmartFeed system. This feed-sensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger, hardwood material.
3-year/3000-hour extended limited warranty
  • Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drum, shaft and ring-fetter hubs in addition to the 1-year/1000-hour Vermeer equipment limited warranty.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC1000XL Gas
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) at 12" (30.5 cm) increments
  • Unleaded and E10 gasoline
  • Available
  • 168.9 cm | Infeed Table: 132.1 cm | Drum/Disc: 50.8 cm
  • 256.5 cm | Infeed Hopper: 30.5 cm | Chute: 256.5 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC1000XL Gas
  • Brush
  • Deutz
  • 28.3
  • 4
  • Maximum: 54 kw
  • 208.8 Nm
  • 6.1 cm
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid cooled
  • Manufacturer: White
  • Max Fuel Consumption: 15.3 lph
  • Unleaded and E10 gasoline
  • Clutchless PTO | Drive Engagement: Belt tensioner
  • Torsion | Type - Option: Rubber torsional | Manufacturer - Option: Dexter
  • ST235/80/R16 Load Range E / ST235/80R16 Load Range E
  • 16 " x 6 " (40.6 cm x 15.2 cm)
  • Group 24; 580 CCA
  • System Voltage: 12 Volt
  • 95 amps
  • Feed: 118 ft/min | 2220 rpm
  • Actuation Force (BFSB): 15.4 kg | Actuation Force: 15.4 kg
  • 119 dB(A)
  • System Type: Open center
  • Pump Flow at Maximum RPM: 11.4 L/min
  • System relief: 172.4 bar
  • 580 cfm
  • Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) at 12" (30.5 cm) increments
  • 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness
  • Pintle
  • Fan: 18.75-in suction | Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 2.5 cm | Feed Roller: 20 " x 17 " (50.8 cm x 43.2 cm) | Infeed Throat Capacity: 12 " x 17.5 " (30.5 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 168.9 cm | Distance from Feed Table to Ground: 66 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 30.5 cm | Thickness: 50.8 cm | Diameter: 50.8 cm | Knife Thickness: 1.6 cm | Knife Size: 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5 " x 17.3 " (8.9 cm x 43.8 cm) | Bedknife Thickness: 2.5 cm | Chute Rotation Angle: 270 deg
  • Feed Table Up, Tongue In: 406.4 cm | Table Down, Tongue Extended: 528.3 cm | Infeed Table: 81.3 cm
  • 168.9 cm | Infeed Table: 132.1 cm | Drum/Disc: 50.8 cm
  • 256.5 cm | Infeed Hopper: 30.5 cm | Chute: 256.5 cm
  • 75.7 L
  • Volume with Filter: 7.6 L
  • Coolant Capacity (Engine and Radiator): 20.8 L
  • Feed Roller Clamp Load: 158.8 kg| Static: 53500 lbs
  • 26.5 L
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral, and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Manual rotate with pin lock | Filtration Method: 10 micron return; 100 micron suction | Manufacturer: Linkbelt | Controller: Vermeer ACS | Shutdown System: High temp, low pressure
  • Of Feed Roller: 181.4 kg | With Shaft: 208.7 kg | Engine Option One: 2122.8 kg | Tongue - Engine Option One: 235.9 kg
  • Recommended: 10W30 | hydraulic Recommended: Vermeer VMF
  • A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on steel
  • 5
  • 5V
  • 2 | Number of Bolts/Knife: 4