2024 Vermeer® Brush Chippers AX17

Information

2024 Vermeer® Brush Chippers AX17

Compact and powerful, the AX17 delivers transport and jobsite advantages for high-capacity takedowns.

The Vermeer AX17 brush chipper is designed for the tree care contractor looking to do high production arborist work. Optimize crew size on the jobsite through mechanized feeding with horizontal off-set feed rollers and a fixed-infeed table. Plus, this single axle fully configured machine under 10,000 lb (4,536 kg) helps with transportation around congested urban areas.

Features may include:

Intelligent feed system
  • Providing over 6,500 lb (2,948 kg) of pull-in power, the AX17 uses the SmartCrush and SmartFeed control systems that reduce the need for operator interaction when feeding difficult material.
Transport-friendly
  • The single axle fully configured machine under 10,000 lb (4,536 kg) helps with ease of transportation around congested urban areas and minimizes the need for additional license requirements.
Feed your way
  • The patented winch boom design can be raised out of the way when mechanically feeding the machine.
Cleanout door for convenient cleanout
  • The AX17 is equipped with a side lever that provides convenient access when opening and closing the cleanout door.
Robust feed table
  • Mechanized feeding made effective with a wide feed roller opening and durable, fixed infeed table design.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers AX17
  • T4
  • Diesel
  • Available
  • 199.4 cm | Infeed Table: 151.1 cm
  • 280.7 cm | Infeed Hopper: 73.7 cm| Chute: 280.7 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • AX17
  • Brush
  • T4
  • Cummins
  • 3.8 L
  • 4
  • Gross Horsepower (Maximum): 130 hp (96.9 kW)
  • 488.1 Nm
  • 2-Stage Dry
  • Spin On
  • Medium: Liquid
  • of Feed Roller: (3) 2 upper, 1 lower | Displacement: 28.9 cu-in upper | Manufacturer: Parker
  • Max Fuel Consumption: 26.5 lph
  • Diesel
  • Type: Spring-loaded clutch | Engagement: Manual lever
  • Axle/Suspension: 10,000-lb torsion
  • 235/75R17.6
  • Option One: 17.5 x 6.75, bolt circle 8 on 6.6
  • electric
  • Group 31 - 950 CCA
  • 60 amp
  • 12 volt
  • Feed: 95 ft/min | 1800 rpm | Winch Input: 48 rpm
  • Actuation Force (BFSB): 15.4 kg | Actuation Force: 15.4 kg | Rope Line Pull: 907.2 kg
  • Sound Power: 116 dB(a)
  • System: Tandem center
  • Pump at Maximum RPM: 22.7 L/min
  • System relief pressure: 206.8 bar | Auto Reverse PSI: 193.1 bar | Winch Relief System: 117.2 bar
  • Z Channel: .25-in (.64-cm) thickness
  • 3-in ID pintle
  • Trailer Type: LED
  • Maximum Angle of Continuous Operation: 45 deg | Fan: 22 in suction | Feed Roller Minimum Distance to Drum: 1 cm | Feed Roller Dimension: 15 in x 20 in (38.1 cm x 50.8 cm) | Feed Roller Dimension (Two): 11 in x 20 in (27.9 cm x 50.8 cm) | Infeed Throat Capacity: 19.5-in x 20.5-in (49.5-cm x 52.1-cm) | Distance from Feed Table to Ground: 76.2 cm | Infeed Table Material Thickness: .6 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: .12 in | Diameter: 66 cm | Material Thickness: .3 cm | Material Capacity: 43.2 cm | Thickness: 1.3 cm | Diameter: 66 cm | Knife Thickness: 1.9 cm | Knife Size: 5 in x 10 in (12.7 cm x 25.4 cm) | Bedknife Size: 3 in x 20.25 in (7.6 cm x 51.4 cm) | Bedknife Thickness: 3.2 cm | Bedknife Material: 1018 | Bottom Thickness: 1.8 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg | Tongue Description: 3 in x 5 in x 38 in (7.6 cm x 12.7 cm x 96.5 cm) | Tongue Extension: Extendable, 12-in | Winch Boom Structure: .25 in (.64 cm), .19 in (.48 cm) | Winch Rope: 7/16 in | Bore: 7.5 cm
  • Feed Table Up, Tongue In: 533.4 cm | Table Down, Tongue Extended: 563.9 cm | Infeed Table: 132.1 cm | Rope: 46 m
  • 199.4 cm | Infeed Table: 151.1 cm
  • 280.7 cm | Infeed Hopper: 73.7 cm| Chute: 280.7 cm
  • Tank: 151.4 L
  • Volume with Filter: 12.9 L
  • Tank: 11.4 L
  • Feed Roller Clamp Load: 1360.8 kg
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic | Reset Method: Green hold-to-run button | Positions: Four positions: E-stop, Forward, Neutral, Reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Bolts: 5 | Fixture Method: Weld On | Bedknife - Number of Useable Edges: 2 | Number of Bearings: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Number of Bearings: 2 | Type: Spherical roller | Rotational Lock: Yes - self-locking worm gear | Filtration Method: 3 micron return, no suction | Gauges: MPC-12 | Switches: Hold-to-run, sensitivity selector, droop selector, EcoIdle™ engine control system, throttle, chute controls, remote enable, manual feed roller crush | Controller: MPC-12 | Display: MPC-12 | Radio Remote Control: Two options | Fender Description: Bolt-on steel | Type - Option One: Rubber torsional | Manufacturer - Option One: Dexter | Winch Controls: Forward, reverse and fee spool | Rotation Type: Manual (hydraulic option)
  • (with winch, hydraulic jack and hydraulic chute): 4422.5 kg | Engine: 3919 kg | Tongue: 626 kg | of feed rollers: 65.8 kg | of feeed roller(2): 47.6 kg | With Shaft: 387.8 kg
  • Recommended: API CJ-4 or ACEA-E9 | Recommended: HY PWR 68
  • 9 | Number of: 2 | Number of botls: 5
  • A8 chipper steel
  • Number of: 12
  • 5V