2024 Vermeer® Pile Drivers PD10

Information

2024 Vermeer® Pile Drivers PD10

Over the past several years, renewable energy sources – like solar – have become increasingly important contributors to the world’s store of available energy.

To answer the need for quick-working, accurate equipment, Vermeer has developed the robust, productive PD10 pile driver. The PD10 has been specifically designed to meet the tight tolerances demanded by commercial solar contractors and the expansive solar fields they install.

Features may include:

Reduce your cycle time
  • With auto plumb, the mast automatically moves to a plumb orientation with a touch of a button, reducing both cycle time and out-of-plumb piles.
Improve your accuracy
  • With the capability to accept a number of GPS systems, the PD10 can help reduce surveying time and install piles at the correct location, depth and angle.
Efficient ground drive
  • With precise ground drive control, operators can spend less time installing each pile, and move efficiently from one pile to the next.
Take control
  • Dual joystick controls help to implement the above-mentioned features in the fastest and most accurate way.
Leave it like you found it
  • The PD10 features a wide track pad to minimize jobsite disturbance in widely varying ground conditions.
At your fingertips
  • An industry-unique integrated control system offers the operator a variety of machine information, including pile angle and height. Display also shows machine maintenance information to help maintain service schedules.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Pile Drivers PD10
  • Available
  • Operating: 3.1 m
  • Maximum operating - 20' (6.1 m) mast: 7.6 m | Maximum operating - 15' (4.6 m) mast: 6.1 m | Maximum operating - 10' (3 m) mast: 4.5 m

Specifications

  • 2024
  • Vermeer®
  • Pile Drivers
  • PD10
  • Track
  • Impact drive type: High-frequency hammer | Track: Steel track with urethane pads
  • Group Class: 31 | CCA Rating: 950
  • Voltage: 12 | Maximum Hammer Energy: 950 Joules
  • Maximum Transport: 2.7 km/h
  • Maximum hammer impact: 1500
  • Sauer Danfoss H1 hydrostatic
  • Maximum pile (square - large opening): 21.1 cm | Maximum pile (round - large opening): 23.6 cm | Maximum pile (square - standard opening): 15.7 cm | Maximum pile (round - standard opening): 18.3 cm | Maximum angle (perpendicular to travel): 20 deg | Maximum angle (direction of travel): 11 deg
  • 20' (6.1 m) mast: 256.5 cm | 15' (4.6 m) mast: 251.5 cm | 10' (3 m) mast: 251.5 cm
  • 20' (6.1 m) mast: 3.1 m | 15' (4.6 m) mast: 3.1 m | 10' (3 m) mast: 3.1 m | 20 ft (6.1 m) mast: 309.9 cm
  • 20' (6.1 m) mast: 279.4 cm | 15' (4.6 m) mast: 270 cm | 10' (3 m) mast: 270 cm
  • Operating: 3.1 m
  • Operating: 3.1 m
  • Maximum operating - 20' (6.1 m) mast: 7.6 m | Maximum operating - 15' (4.6 m) mast: 6.1 m | Maximum operating - 10' (3 m) mast: 4.5 m
  • Engine crankcase with filter: 8.1 L
  • Tank: 136.3 L
  • 68.1 L
  • Rollover protection system (ROPS) rating: 7393.6 kg
  • Operating - 10' (3 m) mast: 6411.5 kg | Operating - 15' (4.6 m) mast: 6495.4 kg | Operating - 20' (6.1. m) mast: 7248.4 kg