2024 Vermeer® Trommel Screens TR6400

Information

2024 Vermeer® Trommel Screens TR6400

Designed with toughness, compactness and ease of maintenance in mind.

The TR6400 trommel screen was designed with toughness, compactness and ease of maintenance in mind. The 100 hp (75 kW) Deutz Tier 4 Final engine, combined with a 6 ft (1.8 m) by 20 ft (6.1 m) drum is ideal for topsoil, compost and woody biomass applications.

Features may include:

Deutz 3.6L Tier 4F (Stage IV) engine
  • The Deutz 3.6L Tier 4F (Stage IV) engine meets all U.S., Canada and European Union tier/stage regulations.
Drum service access
  • A single large drum door along the side and entry from the end provide superior drum service access.
Low hopper height
  • A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
Quick change drum
  • Efficiently change product size by exchanging drums
Quick change screens
  • Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that requires frequent screen changes. The design also creates a smooth exterior on the drum, reducing the amount of brush wear.
Square lift bars
  • Square lift bars inside the drum enable more material to be carried at a slower drum speed helping decrease fuel consumption and premature wear.
Swing-out engine bay
  • A single large access door provides engine service access.
Tensioned screens
  • Compatibility with smaller gauge wire increases the open screen area thus overall production of the machine, particularly in applications when processing wetter materials.
Vermeer ACS control system
  • These control systems offer the operator flexibility when operating from the machine or cab of the loader. Operators can also adjust conveyor height from the remote, providing the ability to keep them low to the ground to reduce blowing of material.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Trommel Screens TR6400
  • Available
  • Operation: 749.3 cm | Apron Opening: 95.3 cm | Apron Conveyor Belt: 106.7 cm | Self-Cleaning Tail Pulley Dimensions: 38 in | Drum Support Description: 4 in (10.2 cm)
  • Operation: 5.1 m | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Apron Opening: 114.3 cm | Hopper: 9.5 ft (2.9 m) from ground level at operating incline

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR6400
  • General
  • Conveyor: 232.7 cu-cm | Drum: 35.5 cu in (581.7 cu cm)
  • Leaf spring
  • Option One: 445/50 R22.5
  • Drum Drive Chain: 140 extended pin/extended width
  • Collecting Belt: 109.7 m/min | Fines Belt: 121.9 m/min | Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm
  • Drum Operation: 0-33.1 gpm (0-125.3 L/min) | Operation: 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar)
  • Description: Four independent hydraulic jacklegs | Fines Conveyor Frame: Engineered structural frame
  • Head Pulley Takeup: 20.3 cm | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Tail Pulley Takeup: 15.2 cm | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Brush Diameter: 35.6 cm | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 od (20.3 cm) | Drum Angle Adjustability: 0-5 deg | Drum Diameter: 2 m | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Thrust Bearing Diameter: 10.2 cm | Thrust Bearing Face: 5.1 cm | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Self-Cleaning Tail Pulley Dimensions: 8 in diameter, 38 in , crowned wing pully | Head Pulley Type: 8 in (20.3 cm) crowned | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Brush Assembly Support: Two 1.25 in (3.2 cm) sealed ball bearings/brush | Self-Cleaning Return Idlers: 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter, "rattle roller" | Head Pulley Bearing: 1.75 in (4.4 cm) double roller
  • Operation: 16.5 m | Collecting Conveyor: 4.9 m | Drum: 6.1 m | Fines Conveyor: 7.2 m | Apron Conveyor: 3.8 m
  • 12.2 m
  • Operation: 5.1 m | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Apron Opening: 114.3 cm | Hopper: 9.5 ft (2.9 m) from ground level at operating incline
  • 251.5 cm
  • Operation: 749.3 cm | Apron Opening: 95.3 cm | Apron Conveyor Belt: 106.7 cm | Self-Cleaning Tail Pulley Dimensions: 38 in | Drum Support Description: 4 in (10.2 cm)
  • 4 m
  • Conveyor Belt: 91.4 cm
  • Bottom: 95.3 cm
  • Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
  • 5 cu m
  • Tank: 302.8 L
  • 16782.9 kg | Hitch: 1905.1 kg
  • Rubber Flashing: Adjustable corded rubber | Maximum Screen Panels: 8
  • Bristle: Polyethylene
  • Conveyor: 220 lb (99.8 kg), 2 ply, 2/16 x 1/16 in (4.8 mm x 1.6 mm) smooth
  • Leaf spring