2024 Vermeer® Trommel Screens TR626EM

Information

2024 Vermeer® Trommel Screens TR626EM

Electrify your screening operation

Like the TR626 trommel screen, the TR626EM trommel screen takes the Vermeer trommel screen lineup to the next level with similar design and the ability to tackle tough jobs. The Vermeer TR626EM is equipped with a 150-hp (112-kW) Siemens motor which can help reduce jobsite noise and overall machine maintenance.

Features may include:

High production
  • The tensioned screens around the drum add rigidity, allowing use of small gauge wire, which helps increase production capacity and enable processing of wetter material.
Motor starter panel
  • The motor starter panel provides a variable frequency drive (VFD) panel.
Electric motors
  • Powered by two industrial-duty, fully enclosed and fan-cooled electric motors. A single 150-hp (112-kW) motor powers the hydraulic pump stack while a .75-hp (.6-kW) motor powers the cooling fan for the hydraulic system.
Ease of maintenance
  • The TR626EM was built with the operator in mind, designed with various access points to critical areas helping to make maintenance efficient.
Advance controls
  • Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.
Radial stacking conveyor
  • The stacking conveyor with a 180-degree arc increases the amount of material being stacked on the ground. Adjustable stacking height aids with dust control and helps avoid material being blown away.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Trommel Screens TR626EM
  • Available
  • Operation: 287 cm | Apron Opening: 109.2 cm | Apron Conveyor Belt: 121.9 cm | Drum Support Description: 4 in (10.2 cm) | Head Pulley Type: 38 in (99.65 cm)
  • Operation: 4.8 m | Conveyor Belt Stacking: 16.6 ft (5.1 m) with drum at 4 deg | Apron Opening: 86.4 cm | Hopper: 9.5 ft (2.9 m) from ground level at operating incline

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR626EM
  • General
  • Conveyor: 629.3 cu-cm | Drum: 48.8 cu in (800 cu cm)
  • Leaf spring
  • Option One: 235-75R 17.5H qty. 4
  • Drum Drive Chain: 140 WT
  • Fines Belt: 123.4 m/min | Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm
  • Drum Operation: 0-42.6 gpm (161.3 L/min) | Operation: 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Conveyor Operation: 15.4 gpm (58.3 L/min):
  • Description: 4 independent hydraulic jacklegs
  • Self-Cleaning Return Idlers: 6, each 4 in (10.2 cm) diameter | Tail Pulley Takeup: 30.5 cm | Head Pulley Bearing: 2.4 in (6.1 cm) pillow block | Brush Diameter: 35.6 cm | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter | Drum Angle Adjustability: 0-7 degrees | Drum Diameter: 1.8 m | Apron Conveyor Rollers: 4 in (10.2 cm) diameter qty. 14 | Hopper Opening: 13.2 ft x 5.3 ft (4 m x 1.6 m) | Thrust Bearing Diameter: 12.7 cm | Thrust Bearing Face: 7.4 cm | Brush Assembly Support: Two 1.25-in (3.2-cm) sealed ball bearings | Head/Tail Pulley Type: Rubber-lagged, 12 in (30.5 cm ) diameter | Rubber Flashing: Adjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm) | Self-Cleaning Tail Pulley Dimensions: 10 in (25.4 cm) diameter, with 2.4 in (6.1 cm) shaft | Head Pulley Type: Rubber lagged, 12 in (30.5 cm) diameter | Rubber Flashing: Adjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm) | Self-Cleaning Return Idlers: 11, each 4 in (10.2 cm) diameter | Fines Conveyor Frame: 4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing
  • Operation: 25.7 m | Drum: 7.9 m | Apron Conveyor: 4.9 m | Fines Conveyor: 22.1 m
  • 16.6 m
  • Operation: 4.8 m | Conveyor Belt Stacking: 16.6 ft (5.1 m) with drum at 4 deg | Apron Opening: 86.4 cm | Hopper: 9.5 ft (2.9 m) from ground level at operating incline
  • 287 cm
  • Operation: 287 cm | Apron Opening: 109.2 cm | Apron Conveyor Belt: 121.9 cm | Drum Support Description: 4 in (10.2 cm) | Head Pulley Type: 38 in (99.65 cm)
  • 4.1 m
  • Conveyor Belt: 91.4 cm
  • Bottom: 121.9 cm
  • Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
  • 4.6 cu m
  • Tank: 757.1 L
  • Maximum Screen Panels: 8 | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers
  • 29483.5 kg | Hitch: 13607.8 kg
  • Bristle: Polyethylene
  • Conveyor: 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
  • Leaf spring
  • Fines Conveyor: Part of trailer frame