2024 Vermeer® Trommel Screens TR5300EM

Information

2024 Vermeer® Trommel Screens TR5300EM

Designed with the productivity, versatility and mobility to conquer that next job.

The TR5300EM was designed to help accomplish the job wherever it may take you next. Powered by an industrial-duty, fully enclosed, and fan-cooled 60-hp (44.7-kW) Siemens electric motor, this machine was built to reduce exhaust emissions, jobsite noise and machine maintenance. Tension screen drum features are designed for optimum productivity offering simple and quick screen change, allowing you to separate a variety of material.

Features may include:

Tension screen design
  • The ability to adjust the screen quickly will allow operators to change opening size, wire gauge and type of wire so you can separate a wide variety of material.
Advanced controls
  • Operators can control the machine through a Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.
Electric motor
  • The TR5300EM is powered by an industrial-duty, fully enclosed and fan-cooled electric motor. A single 60-hp (44.5-kW) motor powers the hydraulic pump stack. Electric motors reduce exhaust emissions, jobsite noise and maintenance compared to diesel.
Access to critical points
  • Access to critical points on the machine allows for efficient maintenance on components such as motor, trommel drum and drum drive.
Hydraulic-driven chain drive system
  • A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.
Large, low-feed hopper
  • The TR5300EM features a large, low-feed hopper for ease of loading without a loading ramp, maximizing jobsite mobility.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Trommel Screens TR5300EM
  • Available
  • Operation: 286.5 cm | Head Pulley Type: 38-in (96.5-cm) | Self-Cleaning Tail Pulley Dimensions: 96.5-cm | Hopper Opening: 37-in
  • Operation:4.6 m | Conveyor Belt Stacking: 15 ft | Hopper: 9.5 ft (2.9 m)

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR5300EM
  • General
  • Conveyor: 540.8 cu-cm
  • Single leaf sprung
  • Option One: 445/50R22.5
  • Drum Drive Chain: 140 custom extended pin
  • Fines Belt: 152.4 m/min | Drum: 0-24 rpm
  • Drum Operation: 0-30.9 gpm (0-117 L/min) | Operation: 64.4 L/min
  • Fines Conveyor: 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing | Description: Heavy-duty structural tubing
  • Head Pulley Takeup: 10 in (25.4 cm) | Brush Diameter: 35.6 cm | Head Pulley Bearing: 2 7/16-in (6.2-cm) pillow block | Self-Cleaning Return Idlers: 4-in (10.2-cm) rubber disc, qty 8 | Self-Cleaning Tail Pulley Dimensions: 10-in (25.4-cm) diamater, 2 7/16-in (6.1-cm) shaft | Head Pulley Type: Rubber-lagged, 12-in (30.5-cm) diameter | Drum Support Description: Eight poly trunnion rollers 8-in (20.3-cm) diameter | Troughing Idler Type: 20-deg CEMA "B" with permanently seated bearings | Drum Angle Adjustability: 0-7 deg | Drum Diameter: 1.5 m | Thrust Bearing Diameter: 10.2 cm | Thrust Bearing Face: 7.4 cm | Brush Assembly Support: Two 1.25-in (2.3-cm) sealed ball bearings |
  • Operation: 27.4 m | Drum: 4.6 m | Fines Conveyor: 16.8 m | Hopper Opening: 34-in tall
  • 11.9 m
  • Operation:4.6 m | Conveyor Belt Stacking: 15 ft | Hopper: 9.5 ft (2.9 m)
  • 249.9 cm
  • Operation: 286.5 cm | Head Pulley Type: 38-in (96.5-cm) | Self-Cleaning Tail Pulley Dimensions: 96.5-cm | Hopper Opening: 37-in
  • 4.1 m
  • Conveyor Belt: 91.4 cm
  • Bottom: 94 cm
  • 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40%
  • 4.2 cu m
  • Tank: 208.2 l
  • Drum Drive Chain: 140 custom extended pin | Maximum Screen Panels: 4
  • Hitch: 5261.7 kg | 14515 kg
  • Bristle: Polyethylene
  • Conveyor: 220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice