2024 Vermeer® Low Speed Shredders LS3600TX

Information

2024 Vermeer® Low Speed Shredders LS3600TX

Solving long-standing industry maintenance issues.

The single-shaft LS3600TX is the first low speed shredder from Vermeer, featuring exclusive innovations that efficiently process contaminated waste streams and help protect critical machine components. Unparalleled access to the rotor, comb and engine compartment addresses long-time industry maintenance issues.

Features may include:

Full rotor access
  • The hydraulically operated side door provides full exposure to the rotor, comb and belly conveyor to minimize maintenance time. The service area has been designed to allow you to perform maintenance without overhead obstructions.
Full-function remote
  • Adjust machine functions, capture machine data and diagnose equipment fault codes — all from the full-function remote. You can spend more time in the cab throughout the day, monitor machine health and make real-time adjustments remotely, allowing you to keep things running efficiently.
Double-ended comb teeth
  • The LS3600TX has individual bolt-in comb teeth that have two usable edges. This helps extend the life of your teeth and minimize wear costs.
Engine bay access
  • The LS3600TX gives you unparalleled access to the machine. The maintenance-friendly and highly accessible engine bay design includes large access doors, multiple ladder points and a large service platform to help with ease of maintenance and serviceability.
Mechanical driveline and protection
  • Equipped with a reversable mechanical transmission for an efficient power transfer that maximizes productivity. A torque limiter automatically disengages the drive when max torque is experienced — helping protect critical machine components.
Serviceable belly conveyor
  • The belly conveyor can be removed without detaching the discharge conveyor — allowing for minimally invasive service.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Low Speed Shredders LS3600TX
  • Reversing dual clutch
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Infeed hopper: 218.4 cm | Feed opening: 88-in (225-cm) | Belly: 104.1 cm | Discharge: 121.9 cm
  • Loading: 3.2 m | Hopper extension: 45.7 cm | Hopper extension loading: 3.4 m | Load: 8 ft - 14 ft (2.43 m - 4.3 m)

Specifications

  • 2024
  • Vermeer®
  • Low Speed Shredders
  • LS3600TX
  • General
  • CAT
  • Model: C13B
  • T4F/Stage V
  • 6
  • Gross: 340 kw
  • Max: 2822.8 Nm
  • Dry-type with primary and secondary elements and restriction indicator
  • Liquid (Nitrite-free, pre-diluted 50/50)
  • Orbital / Series 40 - axial piston
  • consumption: 73.1 lph |
  • Ultra-low sulfur diesel (<15 ppm)
  • Planetary type: Gearbox | Drive Motor: Fixed displacement | Track Drive Motor Type: Bent axis piston
  • Reversing dual clutch
  • Single caliper disk | Track Brake Type: Hydraulic release
  • 8D-MHD, 1,400 CCA (qty. 2) | AA (qty. 6)
  • 24 V | System Protection: Fused
  • 24 V, 150 A
  • Operating Range: 300 ft (91.4 m)
  • Air to boil temperature: 134° F (56° C)
  • Rotor: 30 rpm | Tip: 310 ft/min | Belt Speed: 239 m/min / 251.2 m/min | Max high speed: 2.7 km/h | Low Speed Travel: 1.9 km/h
  • 112.9 db(A)
  • Components: Nine section | System Type: Open loop / Closed loop
  • 23/8 CC tandem / Variable piston | Track Drive: Closed loop
  • Pump at Maximum RPM: 12.7 gpm/4.4 gpm (61.9 L/min / 16.6 L/min) / 123 L/min / 61.7 L/min / 111.3 L/min
  • System relief: 199.9 bar / 230 bar / 250 bar | Tracks: 280 bar
  • Soft Ground: 106 kPa
  • Unit body construction
  • Rotor diameter: 62.2 cm | Tip Diameter: 100.3 cm | Short tip diameter: 93.3 cm | Wear Plate Thickness: 1.3 cm | Tail pulley diameter: 22.9 cm / 30.5 cm | Drive pulley diameter: 22.9 cm / 32.4 cm
  • Infeed hopper: 111.8 cm | Hopper extension: 7.6 cm
  • Max: 8.5 m
  • Max: 3.5 m
  • Max: 2.5 m
  • axle to idler-sprocket 10.86 ft (3.31 m)
  • 17.7 in (45 cm)
  • Working: 14.4 m | Infeed hopper (with extension): 370.2 cm | Hopper extension: 170.2 cm | Feed opening: 145.75-in (370-cm) | Rotor: 3.1 m | Rotor skin thickness: 3.2 cm | Belly: 3.9 m | Discharge: 6.8 m
  • Infeed hopper: 218.4 cm | Feed opening: 88-in (225-cm) | Belly: 104.1 cm | Discharge: 121.9 cm
  • Loading: 3.2 m | Hopper extension: 45.7 cm | Hopper extension loading: 3.4 m | Load: 8 ft - 14 ft (2.43 m - 4.3 m)
  • Tank: 552.7 L
  • Tank: 151.4 L
  • Coolant Capacity (Engine and Radiator): 51.9 L
  • With filter: 42.6 L
  • 7.8 cu m
  • Fan Multi-wing (variable pitch) | Fan - CAC Electric (variable speed) | Torque Limiter: Ball detent | Number of mounts: 21 | Number of Tips: 21 | Tip types: Tall/short | Splice: Continuous / R2 stainless steel cable | Return Roller Quantity: 2 | Filtration Method: Dual in-tank return filters | Number of Coolers: 1 | Fan type (FWD/REV): Multi-wing (variable pitch) | Display Type: LCD touchscreen / LCD | Switches: Sealed membrane CAN bus keypad / Sealed membrane | Channel Setting: 50 channels | Track Type: N.1 FL6 triple grouser | Type of Idler: FL6 track roller | Number of Idlers: 9
  • Maximun: 32499.9 kg | Rotor: 2585.5 kg
  • Full-flow, spin-on
  • Recommended: API CJ-4, 15W-40 / Vermeer HyPower 68
  • Hopper extension: Integrated steel with hydraulic cylinder
  • Design: 1-ply — 330# with V-cleat — steel mesh / 3-ply — 330# with V-cleat