2024 Vermeer® Round Hay Balers 5520

Information

2024 Vermeer® Round Hay Balers 5520

The 5520 is designed for hard-working, independent operators who have a sharp eye for great values.

These smaller 60-in (152.4-cm) diameter balers offer the perfect balance of simplicity, convenience and long-term reliability for the rural lifestyle customer.

Features may include:

Advanced netwrap system
  • Advanced netwrap system makes net easier to feed, easier to operate. No more hassles with belts and rollers. Just feed net directly to the baler’s main belts.
Balanced density system
  • New balanced density system, with improved belt tracking, increases belt life and produces better-looking bales. Also, Alligator rivet belt laces are used for maximum strength.
Smaller balers
  • With a 50-hp (37-kW) tractor, the Rebel 5520 baler produces 5-ft x 5-ft (1.5-m x 1.5-m) bales that weigh up to 1200 lb (544.3 kg).

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Round Hay Balers 5520
  • Available
  • with standard tires: 276.9 cm | tooth to tooth: 144.8 cm | Bale: 154.9 cm | of Belt: 17.3 cm | of Haysaver wheels listed for select models only: 221 cm | on outside flair: 147.3 cm
  • 259.1 cm

Specifications

  • 2024
  • Vermeer®
  • Round Hay Balers
  • 5520
  • Round Baler
  • horsepower recommended: 44.7 kw| Minimum: 37.3 kw
  • 540 rpm, standard lube, radial pin clutch
  • Torque protection pickup: Radial pin
  • 12.5L-15
  • Flotation: Spring assist
  • Start Roller Size: 11.4 cm | Idler roller size: 3.5 in (8.9 cm), 4.8 in (12.1 cm) | Drum roller size: 30.5 cm | Drive Roller Size: 5.5 in (14 cm) | Cylinder size: 2.5 in (6.4 cm)
  • with standard tires: 276.9 cm | tooth to tooth: 144.8 cm | Bale: 154.9 cm | of Belt: 17.3 cm | of Haysaver wheels listed for select models only: 221 cm | on outside flair: 147.3 cm
  • 259.1 cm
  • with ramp: 424.2 cm | with net: 434.3 cm | 381 cm | of belt (short): 1089.7 cm | of belt (long): 1120.1 cm
  • 36 in - 60 in (91.4 cm - 152.4 cm)
  • fully optioned: 2413.1 kg | Maximum bale: 635 kg
  • Bearing and Sprocket Configuration: Round drive shafts and bearings — hex shaft on drum | Tooth Bars: 4 | Number of Teeth: (40) double rubber-mounted | Net tension control: via mechanical adjustment | Type of Lace: Alligator rivet | Display: Monochrome LCD screen | Pickup type
  • Pickup: Manual
  • Bale density adjustments: Manual adjustment on relief valve
  • Standard mini rough top
  • Number of Belts: 7