2024 Vermeer® Bale Processors CPX9000
- Year 2024
- Make Vermeer®
- Model Bale Processors
2024 Vermeer® Bale Processors CPX9000
2024 Vermeer® Bale Processors CPX9000
Go the distance.The Catapult® CPX9000 bale processor is a machine that offers power, versatility and easy operation. The Catapult processor allows material to be thrown 60 ft - 100 ft (18.3 m - 30.5 m), whether that be up and over feed bunks in a cattle operation or for land reclamation and erosion control purposes. Hydraulic controls make this machine easy to use, giving operators the ability to choose how the spout is angled and how the crop is distributed. The Catapult processor is available only at participating dealers.
Features may include:
Smooth material feeding- Optimizing productivity, the Catapult processor provides smooth material feeding by adjusting the feed rate of the bale chain bed to maintain a proper load and PTO RPM on the tractor.
- Direct feed from a dual fan air circulation system provides consistent material flow from the tub to the spout, reducing inconsistent material flow common with non-direct feed systems.
- Replaceable, abrasive-resistant steel liners provide durability, especially needed when processing contamination-filled material like cornstalks.
PTO
PTO Power, Rated Engine Speed
PTO horsepower minimum: 110 hp (82 kW) | PTO horsepower recommended: 111.9 kw
Maximum PTO
156.6 kw
Wheels & Tires
Tires, Rear Specification
16L-16.1SL 6 SofTrac II
Operational
Operating Speed
1000 rpm | Flail drum: 1000 rpm | Fan speed front: 1500 rpm | Fan Speed rear: 1000 rpm
Hydraulics
Hydraulic Type
2 double-acting
Maximum Pressure
137.9 bar
Hydraulic Flow
Rate: 30.3 L/min
Dimensions
Dimensions
Bale size capacity: (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m) | Axle: 12 in (30.5 cm) | Flail description: 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring | Flail Drum Diameter: 68.1 cm | Horizontal spread distance Up to 100 ft (30.5 m) | Blower: (2) 38.6 in (98 cm) blower fans (1500 rpm front and 1000 rpm rear)
Length
4.8 m | Flail drum: 198.1 cm
Height
3 m
Transport Width
2.6 m
Width, Working Position
6 m
Weights
Weight
3383.8 kg | Drawbar: 1134 kg | Bale capacity: 1134 kg
Features
Adjustability
Cut Control Bar Adjustment: Hand lever with 5 settings, plus an additional high/low setting
Features
Bale rotation: 3 roller chains with bolt-on cross slat | Cut Control Bar Quantity: 7
Flail Quantity
Drum: 30
Discharge Type
Direction: Right and left hand, a 260-deg rotation