2024 Haybuster® Tub Grinders H-1000

Information

2024 Haybuster® Tub Grinders H-1000

The Haybuster PTO Tub Grinder line is made up of three sizes of grinders plus the option of an electric motor.

The Haybuster Model H-1000 tub grinder is the most economical grinder available. Designed for the small rancher who still needs to get the hay ground. Fifty to 100 head cattle ranchers have learned to appreciate the ability and price of the H-1000. Of course, to make the H-1000 affordable for the smaller rancher, it’s limited on certain features compared to other Haybuster models. The limited features include no tub tilt and a lighter-duty hammermill. This hammermill only requires an 80 hp PTO tractor and ideally a 125 hp tractor for its maximum efficiency. If your herd size and tractor size fit these criteria, this may be the tub grinder for you.

Features may include:

18” Wide by 20’ Long Hydraulic Folding Conveyor

The model H-1000 tub grinder is now equipped with a hydraulic folding conveyor. The 20’ long x 18” wide conveyor allows you to stack ground material up to 13’9” high at a 40 degree angle.

Big Bite Hammermill

The hammermill is constructed of 3/16” thick x 15.75” diameter plates with 15/16” case hardened rods that hold 64-3/8” hammers. These hammers have 4 hardened edges that can be rotated and flipped to get many hours of grinding.

Eight Belt Drive System

The 8-groove belt drive system is dependable. It supplies the power from the PTO of the tractor to the hammermill. This drive system turns the mill at approximately 2 x PTO speed. This mill speed provides for smooth feeding and delivers high capacity grinding performance.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Haybuster®
  • Tub Grinders H-1000
  • Available
  • Tub at Flare: 10 ft. (3.05 m) | 33-¾ in. (85.73 cm) | 18 in. (45.72 cm)
  • Loading: 8 ft. (2.44 m)

Specifications

  • 2024
  • Haybuster®
  • Tub Grinders
  • H-1000
  • Tub
  • 80 HP (59.7 kw) to 175 HP (130.5 kw)
  • Mechanism: Full Sprocket around tub Electro/Hydraulic | PTO through multiple V Belts | Mechanical | & Idler Roller Type: “Easy Clean”
  • 12 VDC
  • Screen Area: 2,400 sq. in. (15,483 sq. cm)
  • 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa)
  • Remote Controls: (1) Double-acting control valve with quick coupler outlets
  • Road: equipment
  • Clevis hitch
  • Conveyor Lift Cylinder: 3" x 12" (7.62 cm x 30.48 cm) | Screens: 1/8 in. (3.18 mm), 3/16 in. (4.76 mm), or 1/4 in. (6.35 mm) thick and various hole sizes from 1/8 in. (3.18 mm) to 4 in. (101.6 cm) | Idle End Bearing: 2-7/16 in. (6.19 cm), Pillow Block | Drive End Bearing: 2-3/4 in.(6.99 cm), Pillow Block | Cylinder Shaft: 3 in. (7.62 cm), Stress Proof Steel | Cylinder Plates: 3/16 in. thick x 15-¾ in. dia. | Hammer Rods: 15/16 in. (23.81 mm) dia., Case Hardened | Hammers: 3/8 in. (9.53 mm) Thick, A.B. Hardened Swing | Feed Opening: 27 in. x 45 in. (68.58 cm x 114.3 cm) | Diameter, Hammers Extended: 26 in. (66 cm) | Tub Inside dia at Base: 8 ft. (2.44 m) | Tub Wall Thickness: 12 gage (2.66 mm) | Tub Floor Thickness: 10 gage (3.42 mm)
  • 10 ft. 3 in. (3.12 m)
  • 10 ft. 2 in. (3.10 m)
  • 20 ft. (6.10 m)
  • Loading: 8 ft. (2.44 m)
  • Tub at Flare: 10 ft. (3.05 m) | 33-¾ in. (85.73 cm) | 18 in. (45.72 cm)
  • 44-1/2 in. (1.13 m)
  • 44-1/2 in. (1.13 m) | 20 ft. (6.1 m)
  • Size: 9 in. (22.86 cm) x 96 in. (2.44 m)
  • Maximum Conveyor: 13 ft. 9 in. (4.19 m)
  • Reservoir: 12 gallon (45.4 liter) capacity
  • Requirement: Mobil 423, Co-op Super HTB or Equivalent
  • Total: 6,830 lbs. (3,098 kg)
  • Bearings: Tapered roller | Speed Control: Electronic Governor | SMV Sign: Equipment
  • 64
  • Double Free Floating Augers | Rubber Belt with Cleats | Lift: Hydraulic | Fold: Hydraulic Folding Over Rear of Tub